Sign In | Join Free | My fnxradio.com
China Sinuo Testing Equipment Co. , Limited logo
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Verified Supplier

7 Years
Home > Vehicle Testing Equipment >

IEC 60309-1 Fig 7 Green Car Accessories Mechanical Strength Impact Test Apparatus

Product Categories
Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC 60309-1 Fig 7 Green Car Accessories Mechanical Strength Impact Test Apparatus

Brand Name : Sinuo

Model Number : SN1108

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : L/C, , T/T, Western Union, MoneyGram

Supply Ability : 1 set per month

Delivery Time : 30 Days

Packaging Details : Plywood

Applied Standard : IEC60309-1: 2012

Applied Clause : Clause 24.2

Applied Figure : Figure 7

Impact Energy : 1～6J

Hammer Anvil : Ф50mm

Impact Angle : 25°, 35°, 36°, 42°, 47°, 52°

Pendulum Material : Steel pipe

Pendulum Length : 1M

Contact Now


IEC60309-1 Green Car Accessories Mechanical Strength Impact Test Apparatus

Equipment Introduction:
The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and figure 7, etc. It is used to verify the mechanical strength of the vehicle plugs, socket-outlets and couplers accessories.
The experimental principle is that after the gravitational potential energy is converted into kinetic energy, the equivalent mass impact weights will be freely released at a certain height to achieve the required impact energy.
The mounting bracket can be adjusted in three-axis, front and back, up and down, and left and right, which has strong applicability.
Technical Parameters:
Operation MethodManual operation
Impact Weight50*16mm; 304# stainless steel 0.25Kg impact weights
Combined Impact Weight

0.5Kg (low energy) (2 pieces of 0.25Kg weights),
1Kg (high energy) (4 pieces of 0.25Kg weights)

Impact Energy1～6J (The impact weights can be interchangeable)
Hammer AnvilФ50 mm
Impact Angle25°, 35°, 36°, 42°, 47°, 52°
Pendulum Support StructureCan move back and forth, left and right, up and do and can rotate 90°
Pendulum MaterialSteel pipe with outer diameter of 10 mm and wall thickness of 1.0 mm
Pendulum Length1m, from the pivot to the center of the impact element
Mounting Plate8mm thick stainless-steel plate, made according to the customer's specified aperture and position, default one set
Impact Height776mm, 833mm
Vertical Backboard MaterialPlywood
X/Y/Z Axis StrokeMovable range is greater than 300 mm

Counterweight and impact energy:
Choose the counterweight and drop angle according to the impact energy. If the impact energy is ≤2J, add two counterweights at the upper hole position and with one weight on each side, the total mass is 0.5kg; if the impact energy is >2J, add two more counterweights at the lower hole position and with two weights on each side, the total mass is 1Kg.
Counterweights of the impact energy and the impact angle are shown in following Table:

Impact energy(J)Counterweights(Kg)Release angle
10.525°
20.535°
3136°
4142°
5147°
6152°








Product Tags:

IEC60309-1 Strength Impact Test Apparatus

      

Figure 7 Strength Impact Test Apparatus

      

Mechanical Strength Impact Test Apparatus

      
Wholesale IEC 60309-1 Fig 7 Green Car Accessories Mechanical Strength Impact Test Apparatus from china suppliers

IEC 60309-1 Fig 7 Green Car Accessories Mechanical Strength Impact Test Apparatus Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Sinuo Testing Equipment Co. , Limited
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like